Automatic Vision Measuring Systems Suppliers Manufacturer – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli
Automatic Vision Measuring Systems Suppliers Manufacturer – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli Detail:
Introduction
PPG-60403ELS-800KG is suitable for measuring the thickness of lithium batteries, automotive power batteries and other non-battery thin products. It uses servo motor to provide pressure, so that the product measurement is more accurate.
Operating steps
The specific measurement steps of the high pressure electric PPG battery thickness gauge are as follows:
1. Turn on the power of the machine
2. The machine returns to the zero position and performs height correction
3. Set the measurement procedure (including setting the required measurement force value, measurement thickness and running speed etc.)
4. Put the product into the test platform
5. Start the test
6. Display test data and export reports
7. Replace the next product to be tested
The Main Accessories
1. Sensor: Open grating encoder.
2. Coating: baking paint.
3. Parts material: steel, 00 grade cyan marble.
4. Housing material: steel, aluminum.
Technical parameters
|
S/N |
Item |
Configration |
|
1 |
Effective test area |
L600mm × W400mm |
|
2 |
Thickness range |
0-30mm |
|
3 |
Working distance |
≥50mm |
|
4 |
Reading resolution |
0.0005mm |
|
5 |
Flatness of marble |
0.005mm |
|
6 |
Measurement error of one position |
Put a PPG standard gauge block between the upper and lower pressure plates, repeat the test 10 times at the same position, and its fluctuation range is less than or equal to 0.02mm. |
|
7 |
Comprehensive measurement error |
Place a PPG standard gauge block between the upper and lower platens, and measure the center point of the platen and the dimensions of the 4 corners. The fluctuation range of the measured value of the center point and the four corners minus the standard value is less than or equal to 0.04mm. |
|
8 |
Test pressure range |
0-800kg |
|
9 |
Pressure method |
Use servo motor to provide pressure |
|
10 |
Work beat |
<30 seconds |
|
11 |
GR&R |
<10% |
|
12 |
Transfer method |
Linear guide, screw, servo motor |
|
13 |
Power |
AC 220V 50HZ |
|
14 |
Operating environment |
Temperature：23℃±2℃ Humidity：30～80% |
|
Vibration：＜0.002mm/s，＜15Hz |
||
|
15 |
Weigh |
350kg |
|
16 |
***Other specifications of the machine can be customized. |
|
Pictures of the device
Product detail pictures:
Related Product Guide:
With this motto in mind, we've got become among essentially the most technologically innovative, cost-efficient, and price-competitive manufacturers for Automatic Vision Measuring Systems Suppliers Manufacturer – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli , The product will supply to all over the world, such as: Algeria, Sao Paulo, Albania, we're now looking forward to even greater cooperation with overseas customers based on mutual benefits. We are going to work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
By Alexia from Ireland - 2017.11.11 11:41
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Stephen from Uruguay - 2018.06.30 17:29
