Fully-automatic Vision Measuring Systems

Short Description:

FA series non-contact 3D video measurement system adopts cantilever structure, which is simple and convenient to operate. It is an upgraded version of the EA series. Its X, Y, and Z axes are all driven by linear guides and screw rods, with higher precision and more accurate machine positioning. The Z axis can be equipped with lasers and probes for 3D dimension measurement.

Send email to us

Product Detail

Product Tags

Product Video

Parameters & Features

Model	CLT-3020FA	CLT-4030FA
X/Y/Z measurement stroke	300×200×200mm	400×300×200mm
Z axis stroke	Effective space: 200mm, working distance: 90mm
XYZ axis base	X/Y mobile platform：Grade 00 cyan marble Z axis column: square steel
Machine base	Grade 00 cyan marble
Size of glass countertop	340×240mm	440×340mm
Size of marble countertop	460×460mm	560×560mm
Bearing capacity of glass countertop	30kg
Transmission type	X/Y/Z axis: Hiwin P-grade linear guides and C5 grade ground ball screw
Optical scale resolution	0.0005mm
X/Y linear measurement accuracy (μm)	≤2+L/200	≤2.5+L/200
Repetition accuracy (μm)	≤2	≤2.5
Camera	Hikvision 1/2″ HD color industrial camera
Lens	Self-developed automatic zoom lens optical magnification: 0.6X-5.0X image magnification: 30X-300X
Image system	Image software: it can measure points, lines, circles, arcs, angles, distances, ellipses, rectangles, continuous curves, tilt corrections, plane corrections, and origin setting. The measurement results display the tolerance value, roundness, straightness, position and perpendicularity. The degree of parallelism can be directly exported and imported into Dxf, Word, Excel, and Spc files for editing which is suitable for batch testing for customer report programming. At the same time, part of and the entire product can be photographed and scanned, and the size and image of the entire product can be recorded and archived, then the dimensional error marked on the picture is clear at a glance.
	Image card: intel gigabit network video capture card
Illumination system	Continuously adjustable LED light (Surface illumination +contour illumination), with lower heating value and long service life
Overall dimension（*LWH*）	950×830×1600mm
Weight（kg）	250kg	270kg
Power supply	AC220V/50HZ　AC110V/60HZ
Computer	Intel i5+8g+512g
Display	Philips 27 inches
Warranty	1 year warranty for the whole machine
Switching power supply	Mingwei MW 12V/24V

Environment of Instrument

1. Temperature and humidity

Temperature: 20－25℃, optimal temperature: 22℃; relative humidity: 50％－60％, optimal relative humidity: 55％; Maximum temperature change rate in the machine room: 10℃/h; It is recommended to use a humidifier in dry area, and use a dehumidifier in humid area.

2. Heat calculation in the workshop

·Keep the machine system in the workshop operating in the optimum temperature and humidity, and the total indoor heat dissipation must be calculated, including the total heat dissipation of indoor equipment and instruments (lights and general lighting can be ignored)

·Heat dissipation of human body: 600BTY/h/person

·Heat dissipation of workshop: 5/m²

·Instrument placement space (L*W*H): 2M ╳ 2M ╳ 2M

3. Dust content of air

The machine room shall be kept clean, and the impurities greater than 0.5MLXPOV in the air shall not exceed 45000 per cubic foot. If there is too much dust in the air, it is easy to cause resource read and write errors and damage to the disk or read-write heads in the disk drive.

4. Vibration degree of machine room

The vibration degree of machine room shall not exceed 0.5T. Machines that vibrate in the machine room shall not be placed together, because the vibration will loosen the mechanical parts, joints and contact parts of the host panel, resulting in abnormal operation of the machine.