HA-Series Fully Automatic 2.5D Vision Measuring Machine Suppliers

Short Description:

HA series is a high-end automatic 2.5d vision measuring machine independently developed and produced by Chengli Technology. It can be equipped with probe or laser to achieve 3d measurement. It is usually used for high-precision product size measurement, such as the measurement of semiconductor chips, precision electronics, precision molds and other products.

Send email to us

Product Detail

Product Tags

Product Video

Parameters & Features

Model	SMU-3030HA	SMU-4040HA	SMU-5040HA
X/Y/Z measurement stroke	300×300×200mm	400×400×200mm	500×400×200mm
Z axis stroke	Effective space: 200mm, working distance: 90mm
XYZ axis base	X/Y mobile platform：Grade 00 cyan marble Z axis column: square steel
Machine base	Grade 00 cyan marble
Size of glass countertop	380×380mm	480×480mm	580×480mm
Size of marble countertop	460×460mm	560×560mm	660×560mm
Bearing capacity of glass countertop	30kg
Transmission type	Hiwin P-grade linear guides and C5-grade ground ball screw
Optical scale resolution	0.0005mm
X/Y linear measurement accuracy (μm)	≤2+L/200	≤2.5+L/200	≤3+L/200
Repetition accuracy (μm)	≤2	≤2.5	≤3
Camera	Hikvision 1/2″ HD color industrial camera
Lens	Auto zoom lens optical magnification: 0.7X-4.5X image magnification: 30X-300X
Image system	Image software: it can measure points, lines, circles, arcs, angles, distances, ellipses, rectangles, continuous curves, tilt corrections, plane corrections, and origin setting. The measurement results display the tolerance value, roundness, straightness, position and perpendicularity. The degree of parallelism can be directly exported and imported into Dxf, Word, Excel, and Spc files for editing which is suitable for batch testing for customer report programming. At the same time, part of and the entire product can be photographed and scanned, and the size and image of the entire product can be recorded and archived, then the dimensional error marked on the picture is clear at a glance.
Image system	Image card: intel gigabit network video capture card
Illumination system	Continuously adjustable LED light (Surface illumination +contour illumination), with lower heating value and long service life
Overall dimension（LWH）	1300×830×1600mm
Weight（kg）	300kg	350kg	400kg
Power supply	AC220V/50HZ　AC110V/60HZ
Computer	intel i5+8g+512g
Display	Philips 27 inches
Warranty	1 year warranty for the whole machine
Switching power supply	Mingwei MW 12V/24V

Product Description

The automatic vision measuring machine is suitable for large-scale two-dimensional dimension measurement of precision electronics, hardware, semiconductors, plastics, precision molds and other products. In the case of product positioning, we only need to edit one program for the same product to achieve fully automatic batch inspection. Its higher precision and measurement efficiency are ten times that of manual vision measuring machines, thus saving labor costs and time costs, and the fully automatic measurement method avoids human operation errors and realizes truly intelligent manufacturing.

Environment of Instrument

1. Temperature and humidity

Temperature: 20－25℃, optimal temperature: 22℃; relative humidity: 50％－60％, optimal relative humidity: 55％; Maximum temperature change rate in the machine room: 10℃/h; It is recommended to use a humidifier in dry area, and use a dehumidifier in humid area.

2. Heat calculation in the workshop

Keep the machine system in the workshop operating in the optimum temperature and humidity, and the total indoor heat dissipation must be calculated, including the total heat dissipation of indoor equipment and instruments (lights and general lighting can be ignored).
1. Heat dissipation of human body: 600BTY/h/person.
2. Heat dissipation of workshop: 5/m2.
3. Instrument placement space (L*W*H): 3M ╳ 2M ╳ 2.5M.

3. Dust content of air

The machine room shall be kept clean, and the impurities greater than 0.5MLXPOV in the air shall not exceed 45000 per cubic foot. If there is too much dust in the air, it is easy to cause resource read and write errors and damage to the disk or read-write heads in the disk drive.

4. Vibration degree of machine room

The vibration degree of machine room shall not exceed 0.5T. Machines that vibrate in the machine room shall not be placed together, because the vibration will loosen the mechanical parts, joints and contact parts of the host panel, resulting in abnormal operation of the machine.

Power Supply

AC220V/50HZ

AC110V/60HZ

FAQ

How about the shipping fees?

The shipping cost depends on the way you choose to get the goods. Express is normally the most quickest but also most expensive way. By seafreight is the best solution for big amounts. Exactly freight rates we can only give you if we know the details of amount, weight and way. Please contact us for further information.

Can you supply the relevant documentation?

Yes, we provide most of the documents, including the technical parameters of the equipment, theinstruction manual of the software and the instructional video, etc.

Previous: EA-Series Fully Automatic 2.5D Fully-Automatic Vision Measuring Machine

Next: Bridge Type Automatic 2.5D Vision Measuring Machine

Auto Focus Vision Measuring Machine

Automatic Vision Measuring Machine

Fully-Automatic Vision Measuring Machine

Gantry Type Vision Measuring Machine

Manual Vision Measuring Machine

One Button Vision Measuring Machine

One-Key Vision Measuring Machine

Vision Measuring Machine Manufacturers

Vision Measuring Machine Price

Vision Measuring Machine Suppliers

Write your message here and send it to us