English
chengli2
Manual Vision Measuring Machine With Metallographic Systems Featured Image
  • Manual Vision Measuring Machine With Metallographic Systems

Manual Vision Measuring Machine With Metallographic Systems

Short Description:

This instrument is mainly used for 2D detection and observation. It uses fourth-generation semiconductor LED lamps and halogen lamps for non-contact measurement and observation. 1. Metallography – widely used in LED liquid crystal, conductive particle color filter, FPD module, semiconductor crystal picture, FPC, IC package CD, image sensor, CCD, CMOS, PDA light source and other products observation and detection. 2. Tools – widely used in the testing of various products such as machinery, hardware, electronic components, molds, plastics, clocks, springs, screws, connectors, etc.


Product Detail

Product Tags

Parameters & Features

Model

CLT-2010MS

X/Y/Z measurement stroke

200×100×150mm

Z axis stroke

Effective space: 150mm, working distance: 45mm

XY axis platform

X/Y mobile platform：Grade 00 cyan marble; Z axis column: cyan marble

Machine base

Grade 00 cyan marble

Size of glass countertop 

250×150mm

Size of marble countertop

400×260mm

Bearing capacity of glass countertop

15kg

Transmission type

X/Y/Z axis: Linear guides and polished rods

Optical scale

0.001mm

X/Y linear measurement accuracy (μm)

≤3+L/200

Repetition accuracy (μm)

≤3

Camera

HD Industrial Camera

Observation method

Brightfield, oblique illumination, polarized light, DIC, transmitted light

Optical system

Infinity Chromatic Aberration Optical System

Metallurgical objective lens 5X/10X/20X/50X/100X optional

Image magnification 200X-2000X

Eyepieces

PL10X/22 Plan High Eyepoint Eyepieces

Objectives

LMPL infinity long working distance metallographic objective

Viewing Tube

30° hinged trinocular, binocular: trinocular = 100:0 or 50:50

Converter

5-Hole Tilt Converter with DIC Slot

The body of the metallographic system

Coaxial coarse and fine adjustment, coarse adjustment stroke 33mm,

 fine adjustment accuracy 0.001mm,

With coarse adjustment mechanism upper limit and elastic adjustment device,

Built-in 90-240V wide voltage transformer, dual power output.

Reflective lighting systems

With variable market diaphragm and aperture diaphragm

and color filter slot and polarizer slot,

With oblique lighting switch lever, single 5W high-power white LED

and continuously adjustable brightness

Projection lighting systems

With variable market diaphragm, aperture diaphragm,

 color filter slot and polarizer slot,

With oblique lighting switch lever, single 5W high-power white LED

and continuously adjustable brightness.

Overall dimension（L*W*H）

670×470×950mm

Weight

150kg

Computer

Intel i5+8g+512g

Display

Philips 24 inches

Warranty

1 year warranty for the whole machine

Switching power supply

Mingwei MW 12V/24V

Environment Of Instrument

1. Temperature and humidity

Temperature: 20－25℃, optimal temperature: 22℃; relative humidity: 50％－60％, optimal relative humidity: 55％; Maximum temperature change rate in the machine room: 10℃/h; It is recommended to use a humidifier in dry area, and use a dehumidifier in humid area.

2. Heat calculation in the workshop

Keep the machine system in the workshop operating in the optimum temperature and humidity, and the total indoor heat dissipation must be calculated, including the total heat dissipation of indoor equipment and instruments (lights and general lighting can be ignored).
1. Heat dissipation of human body: 600BTY/h/person.
2. Heat dissipation of workshop: 5/m2.
3. Instrument placement space (L*W*H): 3M ╳ 2M ╳ 2.5M.

3. Dust content of air

The machine room shall be kept clean, and the impurities greater than 0.5MLXPOV in the air shall not exceed 45000 per cubic foot. If there is too much dust in the air, it is easy to cause resource read and write errors and damage to the disk or read-write heads in the disk drive.

4. Vibration degree of machine room

The vibration degree of machine room shall not exceed 0.5T. Machines that vibrate in the machine room shall not be placed together, because the vibration will loosen the mechanical parts, joints and contact parts of the host panel, resulting in abnormal operation of the machine.

Power Supply

AC220V 50HZ

AC110V 60HZ

FAQ

How about the shipping fees?

Shipping costs depend on how you choose to get your goods. Air freight is usually the fastest but also the most expensive way. Sea freight is the best solution for bulk shipments. The exact shipping fee can only be given to you after we know the details of the quantity, weight and manner. Please contact us for more information.

Can you supply the relevant documentation?

Yes, we provide most of the documents, including the technical parameters of the equipment, theinstruction manual of the software and the instructional video, etc.

  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories