Optical Measuring Equipment Manufacturer – HA-series Fully automatic 2.5D Vision Measuring Machine – Chengli
Optical Measuring Equipment Manufacturer – HA-series Fully automatic 2.5D Vision Measuring Machine – Chengli Detail:
Parameters & Features
|
Model |
SMU-3030HA |
SMU-4040HA |
SMU-5040HA |
|
X/Y/Z measurement stroke |
300×300╳200mm |
400×400╳200mm |
500×400╳200mm |
|
Z axis stroke |
Effective space: 200mm, working distance: 90mm |
||
|
XYZ axis base |
X/Y mobile platform：Jinan green marble; Z axis column: square steel |
||
|
Machine base |
Ji’Nan green marble |
||
|
Size of glass countertop |
380×380mm |
480×480mm |
580×480mm |
|
Size of marble countertop |
460×460mm |
560×560mm |
660×560mm |
|
Bearing capacity of glass countertop |
30kg |
||
|
Transmission type |
X/Y axis: High precision cross drive guide and polished rod Z axis: High precision linear guide and screw rod |
||
|
Optical scale |
X/Y axis: High precision optical scale resolution: 0.001mm |
||
|
X/Y linear measurement accuracy (μm) |
≤2+L/200 |
≤2.5+L/200 |
≤3+L/200 |
|
Repetition accuracy (μm) |
≤2 |
≤2.5 |
≤3 |
|
Camera |
1/3″ HD color industrial camera |
||
|
Lens |
Auto zoom lens, optical magnification: 0.7X-4.5X, image magnification: 30X-300X |
||
|
Image system |
Image software: it can measure points, lines, circles, arcs, angles, distances, ellipses, rectangles, continuous curves, tilt corrections, plane corrections, and origin setting. The measurement results display the tolerance value, roundness, straightness, position and perpendicularity. The degree of parallelism can be directly exported and imported into Dxf, Word, Excel, and Spc files for editing which is suitable for batch testing for customer report programming. At the same time, part of and the entire product can be photographed and scanned, and the size and image of the entire product can be recorded and archived, then the dimensional error marked on the picture is clear at a glance. |
||
|
Image card: SDK2000 chip image transmission system, with clear image and stable transmission. |
|||
|
Illumination system |
Continuously adjustable LED light (Surface illumination +contour illumination), with lower heating value and long service life |
||
|
Overall dimension（L*W*H） |
1300×830×1600mm |
||
|
Weight（kg） |
300kg |
350kg |
400kg |
|
Power supply |
AC220V/50HZ AC110V/60HZ |
||
|
Computer |
Special host |
||
|
Display |
Philips 27 inches |
||
|
Warranty |
1 year warranty for the whole machine |
||
|
Switching power supply |
Mingwei MW 12V/24V |
||
Product Description
The automatic vision measuring machine is suitable for large-scale two-dimensional dimension measurement of precision electronics, hardware, semiconductors, plastics, precision molds and other products. In the case of product positioning, we only need to edit one program for the same product to achieve fully automatic batch inspection. Its higher precision and measurement efficiency are ten times that of manual vision measuring machines, thus saving labor costs and time costs, and the fully automatic measurement method avoids human operation errors and realizes truly intelligent manufacturing.
Environment of Instrument
1. Temperature and humidity
Temperature: 20－25℃, optimal temperature: 22℃; relative humidity: 50％－60％, optimal relative humidity: 55％; Maximum temperature change rate in the machine room: 10℃/h; It is recommended to use a humidifier in dry area, and use a dehumidifier in humid area.
2. Heat calculation in the workshop
Keep the machine system in the workshop operating in the optimum temperature and humidity, and the total indoor heat dissipation must be calculated, including the total heat dissipation of indoor equipment and instruments (lights and general lighting can be ignored).
1. Heat dissipation of human body: 600BTY/h/person.
2. Heat dissipation of workshop: 5/m2.
3. Instrument placement space (L*W*H): 3M ╳ 2M ╳ 2.5M.
3. Dust content of air
The machine room shall be kept clean, and the impurities greater than 0.5MLXPOV in the air shall not exceed 45000 per cubic foot. If there is too much dust in the air, it is easy to cause resource read and write errors and damage to the disk or read-write heads in the disk drive.
4. Vibration degree of machine room
The vibration degree of machine room shall not exceed 0.5T. Machines that vibrate in the machine room shall not be placed together, because the vibration will loosen the mechanical parts, joints and contact parts of the host panel, resulting in abnormal operation of the machine.
Power Supply
AC220V/50HZ
AC110V/60HZ
FAQ
How about the shipping fees?
The shipping cost depends on the way you choose to get the goods. Express is normally the most quickest but also most expensive way. By seafreight is the best solution for big amounts. Exactly freight rates we can only give you if we know the details of amount, weight and way. Please contact us for further information.
Can you supply the relevant documentation?
Yes, we provide most of the documents, including the technical parameters of the equipment, theinstruction manual of the software and the instructional video, etc.
Product detail pictures:
Related Product Guide:
It adheres on the tenet "Honest, industrious, enterprising, innovative" to acquire new solutions continuously. It regards prospects, success as its personal success. Let us build prosperous future hand in hand for Optical Measuring Equipment Manufacturer – HA-series Fully automatic 2.5D Vision Measuring Machine – Chengli , The product will supply to all over the world, such as: French, Slovak Republic, Costa rica, The best and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.
By Joseph from Salt Lake City - 2018.08.12 12:27
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Freda from Kenya - 2017.12.02 14:11
