Ppg Thickness Gauge Company – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli
Ppg Thickness Gauge Company – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli Detail:
Product Video
Introduction
PPG-60403ELS-800KG is suitable for measuring the thickness of lithium batteries, automotive power batteries and other non-battery thin products. It uses servo motor to provide pressure, so that the product measurement is more accurate.
Operating steps
The specific measurement steps of the high pressure electric PPG battery thickness gauge are as follows:
1. Turn on the power of the machine
2. The machine returns to the zero position and performs height correction
3. Set the measurement procedure (including setting the required measurement force value, measurement thickness and running speed etc.)
4. Put the product into the test platform
5. Start the test
6. Display test data and export reports
7. Replace the next product to be tested
The Main Accessories
1. Sensor: Open grating encoder.
2. Coating: baking paint.
3. Parts material: steel, 00 grade cyan marble.
4. Housing material: steel, aluminum.
Technical parameters
|
S/N |
Item |
Configration |
|
1 |
Effective test area |
L600mm × W400mm |
|
2 |
Thickness range |
0-30mm |
|
3 |
Working distance |
≥50mm |
|
4 |
Reading resolution |
0.0005mm |
|
5 |
Flatness of marble |
0.005mm |
|
6 |
Measurement error of one position |
Put a PPG standard gauge block between the upper and lower pressure plates, repeat the test 10 times at the same position, and its fluctuation range is less than or equal to 0.02mm. |
|
7 |
Comprehensive measurement error |
Place a PPG standard gauge block between the upper and lower platens, and measure the center point of the platen and the dimensions of the 4 corners. The fluctuation range of the measured value of the center point and the four corners minus the standard value is less than or equal to 0.04mm. |
|
8 |
Test pressure range |
0-800kg |
|
9 |
Pressure method |
Use servo motor to provide pressure |
|
10 |
Work beat |
<30 seconds |
|
11 |
GR&R |
<10% |
|
12 |
Transfer method |
Linear guide, screw, servo motor |
|
13 |
Power |
AC 220V 50HZ |
|
14 |
Operating environment |
Temperature：23℃±2℃ Humidity：30～80% |
|
Vibration：＜0.002mm/s，＜15Hz |
||
|
15 |
Weigh |
350kg |
|
16 |
***Other specifications of the machine can be customized. |
|
Pictures of the device
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product Excellent, Reasonable Rate and Efficient Service" for Ppg Thickness Gauge Company – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli , The product will supply to all over the world, such as: Hyderabad, Mombasa, Monaco, The design, processing, purchasing, inspection, storage, assembling process are all in scientific and effective documentary process , increasing usage level and reliability of our brand deeply, which makes us become superior supplier of the four major product categories shell castings domestically and obtained the customer's trust well.
By Eileen from Swansea - 2017.06.22 12:49
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Jason from Poland - 2018.07.27 12:26
